Product Description:

The MDD093D-N-060-N2L-110GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts controlled electrical power into precise rotational motion for automated axes and spindles on machinery. The motor supports closed-loop motion tasks in equipment that must regulate speed, torque, and position with consistent accuracy during repeated production cycles. That operating role makes it suitable for automated handling, positioning, and similar industrial duties where stable servo response is required.

This unit can deliver a continuous standstill torque of 24.0 Nm, allowing it to hold or slowly index heavy loads without overheating. When operated at its rated frequency, the rotor can reach a nominal speed of 6000 rpm, which supports fast cycle times in high-speed packaging or positioning tasks. A blocking brake integrated at the non-drive end supplies 22 Nm of static holding torque to secure vertical or suspended loads when power is removed. The motor mounts with a centering diameter of 110 mm, which helps align the stator housing accurately to the machine frame. It also has a motor length code of D, which helps confirm available installation space and cable routing clearance.

Electrical terminations exit on the right side through a keyed connector, which supports secure attachment and orderly cable routing in compact machine layouts. Rotor position and velocity feedback are provided by built-in digital servo feedback (DSF), so the drive can close its control loops without an external encoder. The motor uses a plain shaft with an installed shaft seal, allowing direct coupling to gearboxes or other driven components while helping protect the bearing area from splash. Standard dynamic balancing keeps vibration within ISO limits during operation. The housing is supplied in the standard configuration, and the motor is built without a secondary shaft end.