Product Description:

The MDD093D-N-060-N2L-110GR1 is an AC synchronous servomotor manufactured by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts controlled current from the drive into rotary motion that positions or feeds machine axes in industrial automation systems such as packaging lines or handling modules. Its design integrates feedback, wiring connectors, and mechanical interfaces required for precise closed-loop motion in a compact envelope suitable for cabinet-mounted servo axes.

At standstill, the motor can deliver 24.0 Nm of continuous torque, so process loads remain supported without overheating during static holding phases. Under rated excitation, it reaches a nominal shaft speed of 6000 rpm, giving high linear throughput when coupled to gearboxes or belt transmissions. With frame code 093, the housing dimensions align with standardized mounting patterns used across the MDD family. Electrical power and feedback cables enter from the right side because the connectors are oriented on that face, which can simplify cabinet layouts where drive modules sit to the left. Mechanical output is provided through a plain shaft, allowing direct coupling with clamping hubs or keyed bushings.

Dynamic safety is addressed by an integrated blocking brake that supplies 11 Nm of holding torque, preventing axis drift during power-off or emergency stop conditions. Accurate rotor position is relayed to the controller by digital servo feedback, enabling high-resolution velocity loops without external encoders. Installation is centered by a 110 mm pilot on the flange, and the motor has a shaft seal that protects the front bearing against the ingress of coolant or dust common in machining and material-handling areas. Standard balancing limits residual vibration, while the D length code extends the active stack so higher peak torques can be produced without increasing motor diameter.