Product Description:

The MDD093D-N-060-N2L-110GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical commands into precise mechanical rotation. This makes the motor suitable for positioning tasks in automated machinery and packaging lines where accurate speed and position control are required.

At standstill, the rotor can deliver 24.0 Nm of continuous torque, providing stable holding force for high-speed axes. A nominal speed rating of 6000 rpm sets its upper operating speed when it is paired with the matching inverter. The centering diameter of 110 mm supports rigid, concentric mounting to the machine frame, and the right-side power and feedback port orientation can simplify cable routing when the cabinet is mounted on that side. The unit connects through a removable connector plug set, and position data is returned by an integrated digital servo feedback encoder for closed-loop current, velocity, and position control. The plain shaft mates with backlash-free couplings, and a shaft seal helps block coolant or oil ingress. The motor has no holding brake, so vertical loads require an external holding method during power loss.

The rotor uses standard balancing, which helps reduce residual vibration without requiring special coupling hardware. The enclosure uses a standard housing and achieves IP65 sealing when it is installed correctly. Size code 093 indicates the stator diameter class, and length code D indicates an extended active stack that raises torque density over shorter variants in the same frame. The motor has a single-ended shaft without a side B extension, which keeps the output arrangement straightforward for direct coupling in compact machine layouts and leaves more room for adjacent components.