Product Description:

The MDD093D-N-060-N2L-110GL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies closed-loop torque and speed to automated axes and spindles where precise electrical-to-mechanical conversion is required. In automated machinery, this type of motor supports repeatable positioning, steady speed regulation, and responsive acceleration under changing loads. Its synchronous design lets the controller maintain accurate rotor alignment during both indexing moves and continuous running.

The unit delivers a continuous standstill torque of 24.0 Nm, enabling stable holding force before motion begins. Under rated conditions, the rotor reaches a nominal speed of 6000 rpm, which suits high-cycle production tasks. Mechanical fit is assisted by a centering diameter of 110 mm and by standard balancing that helps limit shaft vibration during continuous operation. This balancing arrangement also supports stable bearing operation at elevated shaft speeds. Power and feedback conductors exit on the left side through a sealed connector interface, which helps simplify cable routing inside compact enclosures. Position data is returned through digital servo feedback (DSF), allowing the controller to compare commanded and actual positions in real time.

An integral blocking brake supplies 22 Nm of static holding torque, so vertical or suspended loads remain locked when the drive is de-energized. The frame uses size code 093 and depth code D, which correspond to the motor's overall dimensions in this series. Output is delivered through a plain shaft with no side B shaft end, matching applications that use a single mechanical output side. A connector-based power port completes the electrical interface, and a shaft seal helps keep lubricant and contaminants separated during normal operation.