Product Description:

The MDD093D-N-060-N2L-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It operates as an electromechanical actuator in digital drive systems, converting controlled stator current into matching shaft motion for position or speed loops. Because the rotor is equipped with permanent magnets and the stator windings are optimized for high-frequency excitation, the unit suits automated tooling stations, packaging machinery, and material-handling axes that require fast acceleration and stable continuous operation.

At standstill, the motor can deliver a continuous torque of 24.0 Nm without exceeding its thermal limit, and it can reach a nominal speed of 6000 rpm when driven by the appropriate inverter. The mechanical interface uses a centering diameter of 110 mm, matching standard flanges for alignment. Frame identification follows size code 093 and length code D. This combination provides the electromagnetic stack length needed to support the stated torque while keeping mass acceptable for moving-axis mounts. The rotor is balanced to a standard grade to minimize vibration, and the plain shaft is delivered without a side-B extension for compact coupling. A standard aluminum housing promotes uniform heat flow during continuous duty.

Electrical and feedback interfaces are placed on the left side because the connection direction is left. Motor power and resolver wiring terminate on a sealed connector that supports quick cable attachment. Position data is returned through the integrated digital servo feedback channel, allowing the drive controller to close high-resolution loops without external encoders. The shaft area is protected by a shaft seal, which helps limit lubricant ingress. This model is supplied without a blocking brake, so holding position must rely on drive torque or external mechanics.