Product Description:

The Bosch Rexroth Indramat MDD093D-N-060-N2L-110GB1 is a synchronous motor in the MDD Synchronous Motors series. Built for digital drive controllers, it converts regulated electrical power into precise rotary motion for coordinated industrial axes such as gantries, tool spindles, and packaging equipment. When paired with a compatible servo drive, it delivers controlled torque and speed for repeatable acceleration, deceleration, and holding behavior. Integrated brake and feedback functions reduce the need for separate external components and help keep the overall machine layout compact. This makes the unit suitable for machines that require accurate starts, stops, and synchronized motion over repeated duty cycles.

The motor uses a centering diameter of 110 mm, which helps align the housing accurately with the machine flange. Power and encoder conductors exit on side B, and a sealed connector provides a direct electrical interface without loose terminal wiring. The windings support a continuous standstill torque of 24.0 Nm, while the internal holding brake can provide up to 11 Nm when the axis is at rest. A nominal speed of 6000 rpm gives the motor a wide operating range for fast positioning and high-speed motion. This arrangement supports axes that must hold position at standstill and still transition quickly into normal running speed.

Position information is returned through digital servo feedback, allowing the drive to monitor rotor movement closely and correct disturbances during closed-loop operation. The output uses a plain shaft, which works with precision couplings in applications that do not require a keyed connection, and a shaft seal helps keep coolant splash away from the bearing area. Standard balancing reduces vibration during rotation, and the housing supports steady heat flow from the stator to the outer surface. This feedback arrangement supports stable low-speed control and accurate tracking during rapid direction changes. The enclosed rear end leaves no second shaft extension, which keeps the package straightforward for direct-coupled machine axes.