Product Description:

The MDD093D-N-060-N2L-110GB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, this motor converts electrical energy into rapid, precisely controlled rotation for industrial positioning, packaging, and material-handling axes. Its standard housing and standard dynamic balancing help keep vibration controlled during repeated motion, while the native digital feedback interface supports stable closed-loop operation across a wide range of machine tasks. It is well suited to automated lines that combine rapid indexing with repeatable position control.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, allowing it to support static loads during prolonged dwell times without excessive heating. When commanded to full speed, it reaches a nominal velocity of 6000 rpm, supporting short cycle times in high-throughput equipment. A centering diameter of 110 mm aligns the flange on the machine frame, and the electrical and feedback connections are oriented on side B to simplify cable routing in compact cabinets. Position accuracy is supported by the integrated digital servo feedback (DSF), which lets the drive monitor rotor angle and adjust current in real time. Because the feedback loop is closed continuously, the connected controller can correct small tracking errors before they become visible at the load.

The motor is supplied without a blocking brake, so any static holding duty must be provided by the drive or by an external clamp. Its electromagnetic stack uses length code D, which gives the motor a longer housing within the size 093 frame. The plain shaft works with flexible couplings or pulleys, and the shaft seal helps limit lubricant migration and contaminant entry at the output end. The longer active section increases the usable magnetic length within the same frame family. A protected shaft interface helps the motor operate in environments where splash or light contamination is present.