Product Description:

The MDD093D-N-060-N2L-110GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for digital drive controllers that require tight velocity control and high cycle rates. Typical uses include conveyor axes, pick-and-place heads, and trimming spindles.

During continuous standstill operation, the rotor can deliver 24.0 Nm of torque, which defines the static load the axis can support without overheating. When energized at rated frequency, the winding reaches a nominal speed of 6000 min⁻¹, giving the motor range for rapid acceleration profiles. Position and velocity are monitored through Digital servo feedback (DSF), so the drive receives high-resolution signals for current regulation. Mechanical centering is guided by a 110 mm pilot diameter that helps keep the stator concentric with the machine frame. A shaft seal protects the bearing area and limits lubricant migration along the shaft.

The connectors are oriented toward Side A, which suits layouts where cables exit from the same end. Power and feedback lines terminate in a keyed connector, allowing replacement without rewiring. The D-length stator provides additional active iron for higher peak torque while keeping the external diameter unchanged. A plain shaft couples directly to gearboxes or belt pulleys, and the motor is supplied without a blocking brake to keep inertia low during agile motion cycles.

Wake Industrial offers same-day shipping on qualifying orders to minimize downtime. Every purchase is backed by a 1-year warranty. Operators can use the chat tool available on the website for questions about type codes or fault codes.