Product Description:

The MDD093D-N-040-N2M-130PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it translates command currents into controlled rotary motion for machine tools, packaging stations, and handling modules that require repeatable positioning. Integrated feedback, an onboard brake, and a sealed housing allow the unit to be installed directly on production equipment without external sensors or separate holding devices. It is suited to applications that depend on accurate speed regulation during repeated motion cycles.

In continuous operation, the motor delivers 24.0 Nm of standstill torque, giving an energized axis the ability to resist process forces. The rotor reaches a nominal speed of 4000 rpm, which supports fast indexing and short cycle movements during normal operation. A centering diameter of 130 mm establishes the register fit for face mounting and helps keep the motor aligned with connected machine elements. Power and feedback conductors terminate through a connector, which keeps wiring compact at the housing interface. Closed-loop data is returned through digital servo feedback, allowing the inverter to monitor position and velocity in real time while the sealed housing helps protect internal parts from airborne contaminants.

An integrated blocking brake supplies 22 Nm of static torque so vertical axes can remain fixed when power is removed. Connection hardware is located on side A, which can simplify cable routing when the drive cabinet is placed on that side of the machine. Rotor position is resolved by an integrated multi-turn absolute encoder, so the control system retains position information over multiple revolutions. The output uses a keyway shaft with a factory-installed shaft seal to limit slip at the coupling and help reduce oil migration into the motor. The single-ended shaft arrangement also leaves clearance for couplings or pulleys in compact installations.