MDD093D-N-040-N2M-130PA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
20 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2M-130PA1 is part of the MDD Synchronous Motors series and is engineered as a motor for digital drive controllers. It features a nominal speed of 4000 min⁻¹, a continuous standstill torque of 24.0 Nm, and an integrated multiturn absolute encoder. The motor includes a blocking brake with 11 Nm holding torque and a 130 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2M-130PA1 synchronous motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a permanent-magnet AC servo unit, it works with compatible digital drive controllers to deliver closed-loop positioning, speed, and torque in automated machinery. Typical duties include indexing tables, packaging axes, and pick-and-place modules where a compact frame, repeatable velocity, and coordinated multi-axis movement are required. It fits inside sealed cabinets or on open machine frames because of its standard housing and single-ended shaft arrangement.
The motor uses a 130 mm centering diameter for accurate mounting alignment, and power connections exit on Side A for straightforward cable routing. At standstill, it can provide 24.0 Nm of continuous torque without overheating, while a nominal speed of 4000 rpm supports fast cyclic motion. An internal brake rated at 11 Nm engages automatically to hold vertical or suspended loads during idle states. Protection against lubricant ingress is provided by a shaft seal, which helps protect the bearing area when the motor is coupled to gearboxes or belt drives. The integrated connector set allows encoder, power, and brake leads to be routed in a single harness.
For closed-loop control, motion feedback is generated by an integrated multi-turn absolute encoder, and position data is transmitted through digital servo feedback (DSF) for rapid loop response. The frame uses the D length code, which gives additional stack height compared with shorter versions and supports higher continuous output. Standard balancing, keyway shaft geometry, and a single-ended shaft end support direct coupling to common machine elements. The housing supports passive convection, and the connector orientation helps maintain practical cable bend radii during installation.
Frequently Asked Questions about MDD093D-N-040-N2M-130PA1:
Q: What is the nominal speed of the MDD093D-N-040-N2M-130PA1 motor?
A: This model has a nominal speed of 4000 min⁻¹, supporting high-speed rotation cycles.
Q: What type of encoder is integrated into the MDD093D-N-040-N2M-130PA1?
A: The motor includes an integrated multiturn absolute encoder, providing precise position feedback.
Q: Does the MDD093D-N-040-N2M-130PA1 come with a holding brake?
A: A blocking brake with a holding torque of 11 Nm is included to keep the shaft stationary when required.
Q: What type of shaft and sealing does the MDD093D-N-040-N2M-130PA1 have?
A: The MDD093D-N-040-N2M-130PA1 features a keyway shaft with a shaft seal for secure coupling and protection against contaminants.
Q: What is the continuous torque at standstill for the MDD093D-N-040-N2M-130PA1?
A: Its continuous torque at standstill is rated at 24.0 Nm, allowing for sustained force during stationary operation.
