Product Description:

The MDD093D-N-040-N2M-130GL2 synchronous servo motor is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise torque and speed regulation are required on automated axes such as packaging pick-and-place stations, transfer systems, or gantry positioning stages. The unit serves as a closed-loop rotary actuator that converts inverter output into controlled mechanical motion for repeatable industrial movement. That operating profile suits machines that must accelerate, decelerate, and hold position with predictable behavior over repeated cycles.

At standstill the motor can continuously deliver 24.0 Nm of torque, allowing it to support static loads without overheating during normal operation. A blocking brake rated at 22 Nm secures the shaft when power is removed. During operation, the rotor reaches a nominal speed of 4000 rpm, which suits high-throughput axes that need fast commanded motion. Accurate alignment to the machine frame is aided by a centering pilot of 130 mm. Power and feedback conductors are routed through a sealed connector interface, which keeps wiring compact and protected at the motor housing.

The motor uses a 093 frame with D length, giving it a longer active section within this size class. Cooling air passes over the housing, and a shaft seal helps protect the bearing area from contamination. The single-ended plain shaft accepts couplings or pulleys on the drive side only. Position data return through digital servo feedback generated by an integrated multi-turn absolute encoder, so the drive can retain absolute position information after power is restored. All terminations are placed on the left side of the stator, which supports installations where cable routing approaches from that direction. This layout also keeps the non-drive end free of cable exits.