MDD093D-N-040-N2M-130GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
53 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2M-130GB2 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers. This model features a 24.0 Nm continuous torque at standstill, an integrated multiturn absolute encoder, and digital servo feedback. It comes with a 130 mm centering diameter, has a standard plain shaft with a shaft seal, and is equipped with a holding brake providing 22 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2M-130GB2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Delivered for use with digital drive controllers, it converts commanded current into controlled mechanical rotation for axis tasks in automated machinery. By combining position feedback with an internal brake, the motor supports closed-loop speed regulation and secure holding at standstill. Its feedback system allows the drive to monitor rotor position during motion and when the shaft is stopped. That makes it suitable for packaging equipment, tooling systems, and material-handling axes that require accurate motion, stable stops, and quick restarts after power interruption.
During continuous stall, the motor produces 24.0 Nm of torque, so the machine can hold load without overheating while stationary. When energized by its drive, it can reach a nominal speed of 4000 rpm, which supports rapid positioning and short cycle times. A centering diameter of 130 mm aligns the housing concentrically with the machine interface, helping maintain accurate mounting. Power and feedback conductors exit through a sealed connector on side B, which can simplify cable routing in enclosed installations. The housing uses a sealed aluminum design, and the shaft seal helps keep oil or coolant away from the bearing set. Standard balancing also helps reduce vibration during higher-speed operation.
A blocking brake integrated in the end bell supplies 22 Nm of holding torque, preventing axis drift when power is removed. Position data are returned through digital servo feedback and an integrated multi-turn absolute encoder, so the controller can retain rotor position and revolution count after power cycles. The output uses a plain shaft that accepts precision couplings for accurate torque transmission. The motor has only one shaft end, so the layout stays compact and unsupported load at the opposite side is reduced. This layout is well suited to repetitive start-stop motion where consistent feedback and reliable holding are needed between moves.
Frequently Asked Questions about MDD093D-N-040-N2M-130GB2:
Q: What type of shaft and sealing does the MDD093D-N-040-N2M-130GB2 motor use?
A: The MDD093D-N-040-N2M-130GB2 motor is equipped with a plain shaft and a shaft seal, helping to prevent contaminants from entering the motor.
Q: What type of encoder is integrated in the MDD093D-N-040-N2M-130GB2 motor?
A: This motor utilizes an integrated multiturn absolute encoder for position feedback.
Q: Does the MDD093D-N-040-N2M-130GB2 have a holding brake, and what is its torque?
A: A blocking brake is included on this model, offering a holding brake torque of 22 Nm.
Q: What is the nominal speed of the MDD093D-N-040-N2M-130GB2 motor?
A: The nominal speed for this motor is 4000 min⁻¹, supporting high-speed applications.
Q: How is the electrical connection oriented and established on the MDD093D-N-040-N2M-130GB2 motor?
A: Connection for this motor is established on Side B via a connector type interface.
