Product Description:

The MDD093D-N-040-N2M-130GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts commanded current into controlled torque so automated axes can follow programmed motion profiles with consistent response. Its integrated multi-turn absolute encoder returns position data to the drive, while the blocking brake holds the shaft when power is removed. This combination makes the motor suitable for vertical loads, stop-position retention, and repeatable motion in industrial handling or packaging stations.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, providing holding force for mid-frame machine axes without overheating. Under rated excitation, it reaches a nominal mechanical speed of 4000 rpm, allowing high cycle rates in pick-and-place or spindle applications. The flange has a centering diameter of 130 mm, which helps align the housing concentrically on mounting plates. An internal spring-applied brake supplies up to 11 Nm of static torque to secure suspended loads during shutdown. Power and feedback plugs are routed toward the rear because the connection hardware is positioned on Side B of the stator frame.

Wiring exits through a keyed connector, which provides a secure electrical interface for motor power and signal lines. The drive processes position data through digital servo feedback, allowing closed-loop control with precise rotor tracking during acceleration, reversal, and steady-speed operation. Frame size 093 indicates the stator diameter class, while length code D gives the motor a deeper active stack without changing the mounting square. A plain shaft is supplied with a shaft seal, which helps keep lubricant inside the motor and limits the entry of coolant mist or airborne particles. Standard balancing and a standard housing suit general motion tasks in industrial equipment.