MDD093D-N-040-N2M-130GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
12 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2M-130GA1 is a synchronous motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 24 Nm and a nominal speed of 4000 min⁻¹. The motor comes with a plain shaft, standard housing, a shaft seal, and an integrated multiturn absolute encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2M-130GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit converts regulated three-phase current into rotary motion for positioning tables, packaging axes, and material-handling gantries. It is intended for closed-loop automation tasks that require predictable speed changes and accurate torque control under continuous feedback. This makes the motor suitable for automated equipment that must start, stop, and reverse with repeatable motion during regular production cycles.
A continuous standstill torque of 24.0 Nm allows the motor to hold load at zero speed without excessive heat buildup during normal operation. The nominal operating speed is 4000 rpm, which supports rapid indexing and short travel cycles on fast-moving axes. A centering diameter of 130 mm seats the frame accurately in a matching mounting recess to support proper alignment with the driven load. For stopped axes and vertical applications, the blocking brake provides 11 Nm of holding torque. The motor uses size code 093, which places it in a mid-range frame section within the series.
Position data is generated by an integrated multi-turn absolute encoder and transmitted as Digital servo feedback (DSF), so the connected drive can track rotor position and restore axis location after power returns. Power, brake, and feedback cables exit on Side A through a sealed connector, which helps keep wiring orderly around the motor and protects the connection point. The output uses a plain shaft with a factory-installed shaft seal to help prevent contamination from reaching internal components. The single shaft end is intended for use with couplings or belt pulleys in standard servo-driven machinery.
Frequently Asked Questions about MDD093D-N-040-N2M-130GA1:
Q: What kind of encoder does the MDD093D-N-040-N2M-130GA1 use for position tracking?
A: The integrated multiturn absolute encoder allows the motor to record and retain position information over multiple revolutions, enabling precise positioning even after power loss.
Q: Does the MDD093D-N-040-N2M-130GA1 include a holding brake and what is its torque rating?
A: This model is equipped with a blocking holding brake that provides 11 Nm of holding torque for securing the load during standstill.
Q: What is the continuous torque output of the MDD093D-N-040-N2M-130GA1 at standstill?
A: The MDD093D-N-040-N2M-130GA1 offers a continuous torque of 24.0 Nm at standstill, suitable for demanding applications that require sustained performance.
Q: Where is the electrical connection located on the MDD093D-N-040-N2M-130GA1 motor?
A: The connection for this motor is made with a connector positioned on Side A of the housing.
Q: What type of shaft does the MDD093D-N-040-N2M-130GA1 have and does it come with a shaft seal?
A: This motor features a plain shaft with a shaft seal to help prevent ingress of contaminants during operation.
