Product Description:

The MDD093D-N-040-N2M-110PR0 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a servo motor intended for digital drive controllers where precise position and velocity loops are required in industrial automation. By converting commanded current into well-regulated torque, the unit drives axes in packaging machines, material-handling gantries, and other motion platforms that depend on rapid acceleration and repeatable stop points.

At standstill, the motor can supply a continuous torque of 24.0 Nm, allowing machinery to hold heavy loads without overheating. When energized at rated frequency, it reaches a nominal speed of 4000 rpm, so the drive system can achieve high linear feed rates with compact gearing. Mounting is referenced to a centering shoulder measuring 110 mm in diameter, which aligns the stator with adjoining frames. Power and feedback connectors are oriented to the right, simplifying cable routing when the cabinet is arranged on the motor's left side. The output shaft is machined with a keyway, which provides a positive connection for pulleys or couplings and helps prevent slip during reversing cycles.

The frame uses length code D and size code 093; this combination corresponds to the active magnetic stack that produces the rated torque while keeping total inertia moderate. A full-length rotor is factory balanced to the standard grade to minimize residual vibration when the housing is bolted to rigid mounts. Position data are derived from an integrated multiturn absolute encoder, and velocity information is returned over Digital servo feedback (DSF) for immediate drive regulation. The motor ships without a blocking brake, so any holding function must be achieved through drive torque or external clamping. A shaft seal is fitted to limit ingress, the single-ended shaft arrangement omits a side-B extension, and the round connector interface supports secure cable connection.