Product Description:

The MDD093D-N-040-N2M-110PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It serves as a rotary actuator for digital drive controllers, delivering commanded torque and speed to indexing tables, gantry axes, and packaging machinery in automated lines. By integrating position feedback electronics within one housing, the motor reduces external component count and helps simplify cabling between the motor and the drive. This arrangement also supports compact machine layouts where responsive closed-loop motion is required.

The motor provides a continuous standstill torque of 24.0 Nm, so it can support load at zero speed during continuous operation. Its rated speed reaches 4000 rpm, which supports fast cycle times in material-handling equipment. Accurate mounting is supported by a centering diameter of 110 mm, helping the motor align with standard machine interfaces and gearbox flanges. Power and feedback conductors exit on side A, and termination is through a single connector that keeps the wiring interface compact. Standard dynamic balancing reduces residual vibration, while the D length code gives the motor a longer active stack for higher output capability.

Axis holding is provided by a blocking brake with 22 Nm of static torque, which helps secure vertical or suspended loads when power is removed. Real-time position data is supplied through digital servo feedback (DSF) using an integrated multi-turn absolute encoder, so the drive can monitor shaft position across multiple revolutions without external transducers. The frame size code 093 keeps the mounting pattern consistent within this motor size, and the shaft uses a keyway for positive torque transmission to couplings or pulleys. The sealed housing, installed shaft seal, and single drive-side shaft end help limit contaminant entry while keeping the motor suitable for synchronized multi-axis systems.