Product Description:

The MDD093D-N-040-N2M-110GR1 is a synchronous AC servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is used with digital drive controllers to convert commanded current into controlled torque and speed in automated axes such as packaging lines, gantries, and material-handling stations. By combining the motor and feedback elements in one compact unit, it supports coordinated motion and helps simplify axis layout. Its closed-loop design also suits applications that require repeatable acceleration, deceleration, and stable running under changing load conditions.

The centering shoulder measures 110 mm, permitting direct seating in correspondingly sized machine housings, and electrical terminations use a sealed connector that exits on the right side to reduce cable loops in cabinets mounted on that side. Rated static performance reaches 24.0 Nm of continuous stall torque, while dynamic operation can be commanded up to 4000 rpm without exceeding the thermal limits of the standard housing. Position information is generated by an integrated multi-turn absolute encoder, which supports absolute referencing after power cycles and feeds data to the controller through digital servo feedback. The rotor is factory balanced to the standard grade to help keep vibration within normal operating limits.

A blocking brake delivers 11 Nm of static torque to secure vertical or suspended loads when the drive is disabled. The output uses a plain shaft and includes a shaft seal to help retain lubricant and limit contaminant entry during operation. The opposite end remains closed, so there is no side B shaft-end configuration and coupling is limited to one drive face. The length designation D in the 093 frame size indicates an extended active stack that increases power density while keeping the motor compatible with the series connector layout and digital feedback connection.