MDD093D-N-040-N2M-110GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
44 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2M-110GR0 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It features a nominal speed of 4000 min⁻¹ and delivers a continuous torque of 24.0 Nm at standstill. This motor has an integrated multiturn absolute encoder and a plain shaft with a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2M-110GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive output current into precise rotary motion for positioning tables, feeders, and other automated axes. An integrated multi-turn absolute encoder supplies position data directly to the drive, while the connector-based terminals support integration into existing servo cabinets with minimal rewiring.
The motor produces a continuous standstill torque of 24.0 Nm, providing steady torque at zero speed during powered operation. Under rated excitation, it can sustain a nominal speed of 4000 rpm, supporting rapid cycle times on indexing equipment. Position feedback is delivered as Digital servo feedback (DSF), giving the controller high-resolution information for tight velocity and position loops. The active magnetic stack corresponds to length code D, which provides more torque capacity than shorter versions in the same frame size. Because the unit is supplied without a blocking brake, vertical axes must rely on external holding devices or drive-controlled braking when power is removed.
A centering pilot of 110 mm aligns the flange accurately on the mounting face and helps limit radial runout. Both power and feedback plugs exit on the right, which can simplify cable routing when multiple motors are mounted close together. The wiring interface is consolidated in a single connector, reducing assembly time while maintaining shield continuity. A plain shaft transmits torque to the load through clamp couplings, and a factory-installed shaft seal helps keep coolant or dust away from the front bearing. The motor is delivered without a side B shaft end, which helps keep mass and inertia lower.
Frequently Asked Questions about MDD093D-N-040-N2M-110GR0:
Q: What type of encoder is used in the MDD093D-N-040-N2M-110GR0 motor?
A: This model features an integrated multiturn absolute encoder for accurate position feedback.
Q: What is the continuous standstill torque of the MDD093D-N-040-N2M-110GR0?
A: The continuous torque at standstill for this motor is 24.0 Nm.
Q: What is the nominal speed rating for this motor?
A: The MDD093D-N-040-N2M-110GR0 operates with a nominal speed of 4000 min⁻¹.
Q: What type of shaft is featured on the MDD093D-N-040-N2M-110GR0?
A: A standard plain shaft with a shaft seal is provided, and the side B shaft end is not included.
Q: Does the MDD093D-N-040-N2M-110GR0 motor have a holding brake?
A: This motor does not include a blocking brake as part of its configuration.
