Product Description:

The MDD093D-N-040-N2M-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into regulated torque and speed for positioning axes, packaging stations, and other industrial automation tasks. Position and velocity data are exchanged through digital servo feedback (DSF), which gives the drive controller the information it needs for accurate closed-loop operation. This arrangement supports repeatable motion in machines that require dependable speed control and precise axis positioning during continuous production.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, giving the axis enough force to support static loads without requiring an external brake in every application. When energized, it reaches a nominal speed of 4000 rpm, allowing rapid indexing cycles in equipment that must maintain high throughput. A centering diameter of 110 mm helps align the housing accurately with gearbox flanges or mounting plates, while the connection points are oriented to the left side so cable runs can be routed clear of nearby components. The motor has a length code of D, which indicates the longest housing variant in the 093 frame and provides additional space for the active winding.

Position information comes from an integrated multiturn absolute encoder, so the rotor angle can be tracked over multiple revolutions without requiring a homing move after every restart. The motor is supplied without a blocking brake, so any required holding force at a standstill must be provided by the drive or by external mechanical means. The output end is built with a shaft seal, which helps limit contaminant ingress in dusty or humid installations. A plain shaft supports coupling-based torque transmission, and the molded connector keeps the power and feedback terminations compact. The motor also uses a standard housing and standard balancing grade to support stable operation in general industrial service.