Product Description:

The MDD093D-N-040-N2M-110GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified for use with digital drive controllers, it converts regulated inverter current into controlled torque and speed for positioning axes in industrial automation lines. This type of motor is suited to applications that require repeatable motion control, steady speed regulation, and accurate axis response during continuous machine operation.

The motor can deliver a continuous standstill torque of 24.0 Nm, allowing a stationary axis to support substantial loads without overheating. At its rated operating point, it reaches a nominal speed of 4000 rpm, which suits drive systems intended for fast motion cycles. A centering diameter of 110 mm helps align the motor concentrically within precision machine frames, and standard balancing keeps vibration at an acceptable level during operation. Feedback is provided by an integrated multiturn absolute encoder together with digital servo feedback (DSF), so the controller receives absolute position data across multiple revolutions without requiring a homing routine after startup.

Mechanical power is transmitted through a plain shaft fitted with a shaft seal, which helps limit contaminant entry and lubricant escape. The integrated blocking brake provides 11 Nm of holding torque to keep a vertical or suspended load secure when power is removed. All electrical connections exit on Side B, which can help keep motor and feedback cables organized in tight enclosures. The motor uses size code 093 with length code D, and power and signal conductors terminate on a connector for direct electrical connection. The shaft end is single-ended, and the housing uses the standard version with standard balancing for typical industrial installations.