Product Description:

The MDD093D-N-040-N2L-130PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive current into rotary motion for positioning or continuous-duty axes in industrial automation. The MDD093D-N-040-N2L-130PR2 combines a permanent-magnet rotor with internal position sensors so a connected drive can command precise acceleration, speed, and holding torque in machine tools and material-handling systems. Its closed-loop design helps the controller respond quickly to load changes during indexing, contouring, and steady-speed operation.

The motor delivers a continuous stall torque of 24.0 Nm, allowing it to hold a load at standstill or produce strong low-speed force without overheating when airflow is limited. During normal operation, the rotor can reach 4000 rpm, giving short cycle times on axes sized for this torque range. When power is removed, a built-in blocking brake supplies 22 Nm of holding torque to help maintain position on vertical or suspended loads. A centering flange of 130 mm provides accurate alignment between the stator housing and the machine frame. Position and speed data are transmitted through digital servo feedback, so the drive receives high-resolution feedback for closed-loop control without an external encoder.

Power, feedback, and brake leads exit on the right side through a circular connector, which can help keep cable routing clear in compact machine layouts. A fitted shaft seal helps prevent coolant or cutting fluid from migrating along the keyed shaft, and the keyway follows a standard shaft form for secure coupling. Size code 093 identifies the stator diameter family, while length code D marks the longest housing in this frame. This combination supports higher torque density within the same mounting pattern and helps the motor fit installations where axial space is available but the mounting footprint must remain unchanged.