Product Description:

The MDD093D-N-040-N2L-130PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it couples with Rexroth drives to deliver programmable motion in pick-and-place axes, packaging conveyors, and other industrial automation stations. The unit belongs to the 093 frame size and is built to translate precisely modulated three-phase current into repeatable rotational movement required for closed-loop positioning and speed control. It is suitable for applications that need accurate starts, stops, and speed changes during normal machine operation.

At standstill, the motor can deliver 24.0 Nm, allowing the axis to hold static loads without overheating when the drive maintains rated current. During motion, it reaches a nominal speed of 4000 rpm, which sets the operating speed used by the controller and connected drivetrain. Position information is returned through digital servo feedback, giving the drive high-resolution data for tight velocity and torque loops. A blocking brake rated at 22 Nm is integrated; when de-energized, it locks the shaft to secure vertical or suspended loads during power loss. Mechanical power is transmitted through a keyway shaft, enabling positive coupling to pulleys or flanges without relying only on friction.

A 130 mm centering diameter helps the motor seat accurately in precision-machined mounting plates, and standard balancing helps reduce residual vibration during operation. Power and feedback cables exit on side B through a keyed connector, which simplifies cabinet wiring and keeps the opposite face clear for access. The enclosure uses a standard housing with an integral shaft seal, which helps prevent lubricant migration along the output shaft when the machine operates in oily or dusty environments. With motor length code D, the motor uses a longer stack for higher torque density while retaining a standard single shaft end.