Product Description:

The MDD093D-N-040-N2L-130PA1 servo motor is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is used with digital drive controllers to convert regulated current into precise rotary motion for indexing tables, packaging axes, and material-handling equipment. The motor is supplied with standard dynamic balancing to reduce vibration during operation, and its standard housing matches the mounting footprint commonly used across the series. Its D length code indicates an extended stator stack, and the single-sided shaft uses a keyway so torque can be transmitted securely to the driven machine element.

Mechanical alignment is supported by a centering pilot of 130 mm, which helps the motor seat accurately against machine flanges or gearbox faces. Power and feedback cables exit on side A, making routing easier in layouts where both connections need to leave from the same end of the housing. During closed-loop operation, the motor provides a continuous standstill torque of 24.0 Nm, allowing it to support stationary process loads without excessive heat buildup. The nominal speed is 4000 rpm, giving the axis a broad operating range, while digital servo feedback supplies the drive with precise rotor position information for stable speed and position control.

An integrated blocking brake supplies 11 Nm of holding torque when engaged, helping keep the load stationary during power loss or stopped conditions. All electrical terminations pass through a sealed connector, which keeps the interface compact and helps protect the connection point from contamination. The motor uses size code 093, placing it in a mid-frame format suited to many general industrial axes. A factory-installed shaft seal protects the front bearing area from lubricants and coolant spray in machines where the drive end is exposed to fluids.