Product Description:

The MDD093D-N-040-N2L-130PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated machinery, where it converts controlled electrical input into precise rotary motion for positioning and velocity tasks on assembly lines, packaging stations, and similar industrial axes. This operating role makes it suitable for motion systems that need repeatable response during start, stop, and speed-control sequences.

This model supplies a continuous standstill torque of 24.0 Nm, allowing it to hold or slowly drive loads without overheating. Under rated excitation it can reach a nominal speed of 4000 rpm, enabling rapid cycle times when paired with appropriately sized drives. A centering diameter of 130 mm supports concentric installation on gearboxes or machine frames, while the power and feedback leads exit on Side A through a sealed connector interface that fits tight cabinet layouts. Position data is returned through Digital servo feedback (DSF), giving the controller high-resolution rotor angle information for closed-loop accuracy. The motor has length code D within the series, and its standard connector type provides a sealed connection for power and feedback cables.

The rotor is manufactured with standard balancing to minimize vibration across the operating range, and the frame size of 093 provides a larger magnetic package than smaller MDD variants. A permanent shaft seal helps block lubricant ingress, and the keyed shaft end mates directly with couplings or pulleys, with no side B shaft extension provided. The unit is supplied without a blocking brake, so external holding devices must be used when the application requires power-off position retention. A connector-based wiring scheme keeps the power and feedback connections enclosed at the motor housing.