Product Description:

The MDD093D-N-040-N2L-130GR2 is a synchronous AC motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for digital drive controllers, it supplies closed-loop torque and speed control for positioning axes, gantries, and continuous-duty conveyors in automated assembly and material-handling cells. A sealed housing, integrated feedback, and standardized mounting features support reliable installation in demanding industrial environments. These features also help the motor suit machines that require repeatable motion under changing loads.

At standstill, the rotor produces a continuous torque of 24.0 Nm, allowing the axis to hold loads without overheating. The winding is optimized for a nominal speed of 4000 rpm, so the motor pairs with high-speed drives that require rapid cycle times. A blocking brake rated at 22 Nm secures vertical loads when power is removed. Position data is generated by the integrated Digital servo feedback (DSF) encoder, which sends position information to the drive for closed-loop control. Mechanical alignment to the machine frame uses a 130 mm pilot diameter, and standard balancing helps keep vibration within normal industrial limits. Power and feedback lines exit through a right-side connector, which can simplify cable routing inside the machine.

Frame designation 093 identifies the motor size, while the D length code indicates a longer stack for higher torque output in this housing. The output uses a plain shaft with a shaft seal, which helps resist coolant splash and dust during normal machine operation. The housing uses a standard single-ended shaft design without a side-B extension, and the connector-based terminal arrangement keeps external wiring compact. This layout supports installations that place the cable track and mating connections on the right side of the machine.