Product Description:

The MDD093D-N-040-N2L-130GR1 is a motor for digital drive controllers produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a synchronous servo device, it converts the drive’s three-phase output into controlled mechanical rotation for positioning tables, pick-and-place axes, or conveyor sections. This motor is intended for repetitive industrial motion where stable speed control and consistent torque output are important. Its compact format helps it fit into automated equipment that needs accurate movement without a large installation footprint.

It supplies a continuous torque of 24.0 Nm at standstill, allowing the axis to hold process loads without additional gearing. During motion, it reaches a nominal speed of 4000 rpm, which suits high-speed feeds and rapid index moves. Position data are returned through digital servo feedback, allowing the host drive to maintain closed-loop velocity and position control. A 130 mm centering pilot aligns the motor accurately on the machine interface. The motor uses frame size 093 with length code D, which provides a longer active stack for higher power output in this housing size. Standard rotor balancing supports smooth running, and the sealed housing helps protect internal components during normal industrial operation. Power and encoder lines are routed through a molded connector to keep cable entry compact and orderly.

For static holding or emergency stops, the motor includes a blocking brake rated at 11 Nm. Electrical terminations exit on the right side of the stator, which can simplify cable routing when the machine layout favors that direction. The output uses a plain shaft, and the front bearing area is protected by a shaft seal that helps keep lubricant in place while limiting the entry of dust and other contaminants. The motor uses a standard single-ended shaft arrangement, so it can connect directly to gearheads, pulleys, or timing belts without an added shaft extension on side B.