Product Description:

The MDD093D-N-040-N2L-130GL0 is a synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers, where commanded current is converted into controlled mechanical rotation for positioning and speed-regulated axes in automated machinery. This arrangement supports repeatable motion in equipment that depends on fast response, accurate path control, and stable operation through changing loads. It is commonly used on feed axes, handling units, and other servo-controlled machine functions.

This model delivers a continuous standstill torque of 24.0 Nm, which supports stable holding and smooth low-speed operation without excessive heating. Its rated speed reaches 4000 rpm, allowing rapid traverse moves when paired with a compatible inverter. A centering shoulder of 130 mm helps seat the motor accurately on a flange-mounted interface and maintain alignment with the driven machine element. All power and feedback cabling exits on the left side, which can simplify routing when several motors share the same machine frame. Position data is returned through Digital servo feedback (DSF), allowing the drive to correct load-related deviations in real time and keep the commanded velocity profile consistent.

The housing uses a standard configuration and supports natural-convection cooling, while a shaft seal helps limit the entry of coolant or lubricant. The output end uses a plain shaft suited to clamp or keyless hubs, and the winding package follows motor length code D for a longer active section within the 093 frame. The motor is supplied without a blocking brake, so holding force at standstill must be provided externally when the axis needs to remain fixed. A single-ended design is used, leaving side B without an auxiliary shaft. The power interface is a rugged industrial connector, allowing quick attachment and removal of the power leads during installation or service.