Product Description:

The MDD093D-N-040-N2L-130GA2 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Serving as a motor for digital drive controllers, it converts regulated current from the drive into rotary motion for positioning and speed control tasks in assembly lines, packaging equipment, and material-handling stations. Its electromechanical design suits mid-frame automation applications where fast cycle times and compact installation spaces are common.

The motor has a continuous standstill torque of 24.0 Nm, allowing the axis to hold static loads without thermal overload. During motion, it reaches a nominal speed of 4000 rpm, which supports short positioning times when linked to gear stages or belts. Mechanical integration is supported by its 130 mm centering diameter and a standard balancing grade that helps limit residual vibration. All power and encoder leads exit on side A, and the housing uses a sealed connector interface that fits tight cabinet layouts. Position feedback is provided through digital servo feedback, enabling real-time transfer of rotor angle to the controller for closed-loop operation. The D-length frame and standard housing finish provide thermal mass while fitting within the 093 frame size.

The motor uses an integrated blocking brake with 22 Nm of static torque when power is removed. Field wiring connects through a keyed connector that locks against vibration during operation. The output uses a plain shaft with a factory-installed shaft seal, which helps prevent lubricant migration into the stator cavity. The unit does not include a secondary shaft end on side B, which helps preserve IP protection and keeps the coupling arrangement straightforward. The motor size is identified as Motor Size 093, and the frame length is D.