MDD093D-N-040-N2L-110PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
49 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2L-110PL2 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a centering diameter of 110 mm, a nominal speed of 4000 rpm, and provides 24.0 Nm of continuous torque at standstill. It includes a keyway shaft, a left-side connector, and comes with a blocking brake rated for 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2L-110PL2 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is supplied as a motor for digital drive controllers and is typically paired with intelligent inverters so that manufacturing cells, pick-and-place axes, or gantry stages receive finely metered rotary motion and rapid positioning. This arrangement lets the drive controller regulate current precisely during acceleration, deceleration, and steady-speed operation. Standard housing, standard dynamic balancing, and a single-ended shaft let the motor fit common mechanical frames while keeping the overall installation layout straightforward.
The motor can deliver a continuous standstill torque of 24.0 Nm, so it can hold a rated load at zero speed without overheating while current is applied. When commanded to full speed, it reaches 4000 rpm, which supports short indexing cycles in fast-moving equipment. A centering pilot of 110 mm aligns the flange accurately during installation. Power and feedback conductors exit on the left side, and terminations are completed through a sealed connector that maintains enclosure integrity. This cable orientation can simplify routing in machines where access is limited near the motor body.
An integrated blocking brake provides 22 Nm of holding torque for axes that must remain in place when power is removed. Position data is returned through Digital servo feedback (DSF), allowing the drive to regulate speed and position without a separate external feedback device. The output shaft has a keyway for positive torque transmission to pulleys or couplings. The motor is supplied with a shaft seal, which helps limit the entry of dust and other contaminants at the shaft exit. The feedback system is integrated into the motor assembly, and the shaft arrangement supports direct connection to keyed drive elements.
Frequently Asked Questions about MDD093D-N-040-N2L-110PL2:
Q: What is the continuous torque at standstill for the MDD093D-N-040-N2L-110PL2 motor?
A: The MDD093D-N-040-N2L-110PL2 provides a continuous holding torque of 24.0 Nm at standstill.
Q: What type of motor feedback does the MDD093D-N-040-N2L-110PL2 use?
A: Digital servo feedback (DSF) is used for motor feedback in this model.
Q: Does the MDD093D-N-040-N2L-110PL2 motor include a holding brake?
A: This motor is equipped with a blocking brake that delivers a holding brake torque of 22 Nm.
Q: What is the nominal speed specification for the MDD093D-N-040-N2L-110PL2?
A: The nominal speed of the MDD093D-N-040-N2L-110PL2 motor is 4000 min⁻¹.
Q: What type of shaft and seal does the MDD093D-N-040-N2L-110PL2 feature?
A: A shaft keyway and shaft seal are provided on this motor for secure coupling and added protection.
