Product Description:

The MDD093D-N-040-N2L-110PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with digital drive controllers, the motor converts commanded current into accurate rotational motion for conveyor lanes, indexing tables, and feeder mechanisms. By turning electrical control signals into controlled rotary motion, it supports precise speed and position loops in industrial automation. Its integrated motor and feedback arrangement makes it suitable for machine axes that require repeatable motion in compact installations.

At rated excitation, the motor delivers a continuous standstill torque of 24.0 Nm. When motion is commanded, it reaches a nominal speed of 4000 rpm, supporting rapid indexing in packaging or assembly lines. Mechanical alignment to the driven machine is provided by a centering seat of 110 mm on the mounting flange, which helps maintain runout accuracy and reduce vibration. Cabling enters from the rear because the terminations are positioned on side B, and a single multi-pin connector carries both power and sensor signals. This arrangement helps keep the motor envelope uncluttered and simplifies cable routing around the machine frame.

Position data is returned to the drive through Digital servo feedback (DSF), enabling closed-loop control without an external encoder. Because the shaft uses a keyway, torque can be transferred directly to couplings or pulleys. The motor is equipped with a shaft seal, which helps keep lubricants in and contaminants out of the bearing area. It is supplied without a blocking brake, so holding torque must come from the drive or an external clamp. The rotor is dynamically balanced to the standard grade, and the housing follows the standard mechanical outline used for this motor family. A standard drive-side shaft end and the absence of a second shaft on side B complete the mechanical interface.