Product Description:

The MDD093D-N-040-N2L-110PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It attaches to digital drive controllers to convert commanded current into controlled rotation, giving automated cells precise position and speed control for pick-and-place units, packaging lines, and material-handling axes. By integrating electronic feedback and mechanical features in a single frame, the motor simplifies installation in compact machine layouts. This arrangement supports repeatable positioning and stable speed control during frequent starts, stops, and direction changes.

In continuous duty, the motor can hold a static load with 24.0 Nm of stall torque, allowing prolonged clamping or indexing without excessive heat rise. It has a nominal speed of 4000 rpm, supporting fast traverse moves when cycle time is critical. Motion data are returned through the integrated digital servo feedback (DSF) encoder, so the controller can correct position on every cycle. Accurate mechanical alignment is aided by a 110 mm centering diameter, and the output shaft uses a keyway profile for positive torque transmission to pulleys or couplings. A shaft seal keeps coolant or dust away from the bearings. The D length code gives the motor a longer active stack for higher torque density, while frame size 093 fits common mounting patterns and the standard housing accepts typical flange adapters.

Cabling is streamlined because the power and feedback plugs are located on Side A, and all conductors terminate in a single connector rather than loose leads. This layout keeps the motor wiring compact and helps maintain orderly cable routing at the machine interface. For vertical or safety-critical axes, a blocking brake delivers 11 Nm of holding torque and engages automatically when power is removed. The motor has a standard shaft end, meaning there is no extension on side B. That layout reduces overhung mass and leaves more clearance around the rear of the motor for adjacent machine components.