Product Description:

The MDD093D-N-040-N2L-110PA0 synchronous servo motor is built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated production lines, where it converts electrical commands into repeatable rotary motion for indexing tables, packaging spindles, and similar axes. In service, the motor supports controlled acceleration, steady running, and accurate stopping on machines that cycle frequently. This type of motor is commonly used where synchronized axis movement and repeatable cycle timing are important to overall machine performance.

At standstill, the motor can deliver 24.0 Nm of continuous torque, which supports moderate inertia loads during controlled motion. During operation, it reaches a nominal speed of 4000 rpm, giving the axis a high operating speed for fast process cycles. Position and velocity are returned through digital servo feedback, so the drive can monitor rotor movement directly and maintain closed-loop control without an external encoder. Accurate mechanical alignment is supported by a centering shoulder of 110 mm, which helps seat the flange on the machine face. Power is transmitted through a shaft with a keyway, allowing couplings or pulleys to be mounted securely. This output arrangement supports positive torque transmission between the motor and the driven mechanism.

The rotor uses standard balancing, which helps limit vibration during normal operation. Cabling exits on Side A, and the motor uses a compact connector interface instead of hard-wired glands. A shaft seal helps reduce splash ingress at the output end, and the motor is supplied without a blocking brake. When the application requires the axis to remain fixed at standstill, holding force must be provided by drive torque or an external clamp.