Product Description:

The MDD093D-N-040-N2L-110GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit provides precise torque and speed control in assembly lines, packaging machines, and other industrial automation equipment. Its D length code indicates an extended stator stack for higher continuous output, and the 093 frame size suits medium-power axes in multi-station machines. Its synchronous design supports responsive acceleration and repeatable positioning when paired with a compatible drive. This motor is suited for servo axes that require accurate holding, smooth running, and controlled speed changes across repeated machine cycles.

It produces a continuous standstill torque of 24.0 Nm, allowing the axis to hold a load without movement while energized. During operation, the rotor can reach a nominal speed of 4000 rpm, which is the rated synchronous speed under normal operating conditions. For rapid deceleration or power-off holding, an integrated brake supplies 11 Nm of static torque. Mechanical alignment to a mounting surface is centered by a 110 mm pilot diameter, which helps support concentric installation with gearboxes or coupling hubs. Feedback to the controller is provided through digital servo feedback, enabling high-resolution position loops. Power and signal connectors face the left side of the housing, which can reduce cabinet depth when multiple motors are arranged in line.

The drive end uses a connector interface, which allows direct cable attachment without opening the housing. The output shaft is a plain shaft without a second shaft extension on side B, supporting direct coupling where keyways are unnecessary. A shaft seal is fitted to limit lubricant escape and help protect the internal bearings against splash. Standard dynamic balancing and normal-duty housing construction help maintain stable vibration behavior during operation.