Product Description:

The MDD093D-N-040-N2L-110GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit supplies closed-loop rotational motion for positioning tables, packaging stations, and other automated axes. It supports controlled acceleration, steady speed regulation, and repeatable stopping behavior in servo systems that require accurate motion. Its mechanical format uses the 093 frame size and D length code, giving a mid-range combination of power and inertia while keeping the overall envelope compatible with standard mounting flanges.

The motor can deliver a continuous standstill torque of 24.0 Nm, providing stable holding force for static loads without overheating. When the shaft is commanded to run, it reaches a nominal speed of 4000 rpm, which suits high-speed servo applications. An integrated blocking brake supplies up to 22 Nm of retaining torque during power-off conditions. Accurate alignment to a machine frame is aided by a centering diameter of 110 mm. For feedback, the rotor uses digital servo feedback, which transmits high-resolution position data to the controller and supports tight velocity and torque loops.

Cabling enters on side B, and the power and signal lines terminate through a single connector to simplify installation. Dynamic balance is supplied in the factory-set standard balancing grade, which helps reduce vibration when the motor is paired with compliant couplings. The output uses a plain shaft with a shaft seal, which supports coupling to gearboxes or belt pulleys while helping protect the bearing area from coolant spray. The single-ended shaft arrangement leaves the opposite end free, which can help preserve clearance around nearby machine components during routine operation.