MDD093D-N-040-N2L-110GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
43 Seconds
The Bosch Rexroth Indramat MDD093D-N-040-N2L-110GA1 is a synchronous motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a holding brake with a torque of 11 Nm, produces a continuous torque of 24.0 Nm at standstill, and has a nominal speed of 4000 min⁻¹. The motor has a 110 mm centering diameter, digital servo feedback, and a standard plain shaft with shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-040-N2L-110GA1 synchronous servo motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into axis torque for packaging machines, transfer stations, and material-handling equipment that require precise acceleration profiles. Its electromagnetic construction couples a permanent-magnet rotor with stator windings optimized for rapid current rise, supporting high dynamics in closed-loop control environments. This arrangement helps the drive respond quickly to changing load demands during positioning and speed regulation.
At standstill the motor develops 24.0 Nm of continuous torque, enough to support high-inertia loads without thermal overload. During normal operation it can reach a nominal mechanical speed of 4000 rpm, enabling rapid cycle times in indexing tables. Mechanical alignment is guided by a centering diameter of 110 mm, and standard balancing helps limit residual vibration during high-speed rotation. An integrated blocking brake supplies 11 Nm of static holding torque for vertical axes, and the frame code of 093 identifies the stator outer dimension used for flange compatibility. The plain shaft is protected by a factory-fitted shaft seal, and the shaft end is supplied only on the drive side to keep coupling arrangements straightforward.
To complement those performance figures, the motor body follows length code D, providing additional stack height for higher power density without changing the mounting interface. Power and feedback cabling are routed on side A, and the single connector interface simplifies wiring in compact machine layouts. Routing both connections through one side can reduce cable crossover near adjacent machine structures. Feedback is handled by digital servo feedback (DSF), which returns position data to the controller for closed-loop speed and position control. The housing is supplied in standard form, and the shaft seal helps keep dust and oil away from the bearing area during normal service.
Frequently Asked Questions about MDD093D-N-040-N2L-110GA1:
Q: Does the MDD093D-N-040-N2L-110GA1 motor come with a holding brake?
A: This model includes a blocking brake with a holding brake torque of 11 Nm.
Q: What is the continuous torque at standstill for the MDD093D-N-040-N2L-110GA1?
A: The continuous torque at standstill for this motor is rated at 24.0 Nm.
Q: What is the centering diameter of the MDD093D-N-040-N2L-110GA1 motor?
A: The centering diameter for this model is 110 mm, providing compatibility with matching flange mounts.
Q: What type of motor feedback does the MDD093D-N-040-N2L-110GA1 utilize?
A: This motor uses digital servo feedback (DSF) for position detection and control.
Q: What is the nominal speed of the MDD093D-N-040-N2L-110GA1 motor?
A: The nominal speed for the MDD093D-N-040-N2L-110GA1 is specified at 4000 min⁻¹.
