Product Description:

The MDD093D-N-030-N2M-130PR2 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts controlled electrical input into precisely regulated mechanical rotation for positioning, feed, and cyclic motion tasks across automated lines. The unit belongs to motor size 093 and length code D, giving it dimensional compatibility with medium-frame machinery, while its standard housing and balancing support straightforward mounting without special vibration isolation. This layout suits machine axes that require repeatable motion during indexing, contouring, and other closed-loop operating cycles.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, so low-speed drive force is available without thermal overload. During rated operation, the rotor turns at 3000 rpm, providing a common operating speed for servo applications that need stable velocity control. Accurate centering is provided by a 130 mm pilot diameter, which aligns the flange to the machine frame and helps keep runout within tolerance. Power is transmitted through a keyway shaft for direct coupling, and the absence of a side-B shaft end leaves more clearance around the non-drive side of the motor.

For controlled stops and vertical loads, the integrated blocking brake supplies 22 Nm of static holding torque and is released as required during operation. Rotor position is returned to the controller through digital servo feedback (DSF) together with an integrated multiturn absolute encoder, enabling multi-turn position tracking without a homing move after a restart. Motor leads exit through a sealed connector with a right-facing orientation, which helps keep cable routing clear of couplings and nearby machine members. A shaft seal helps prevent coolant or oil from reaching internal bearing areas during normal machine use.