MDD093D-N-030-N2M-130PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
2 Seconds
The Bosch Rexroth Indramat MDD093D-N-030-N2M-130PR1 is part of the MDD Synchronous Motors series and features a nominal speed of 3000 min⁻¹ with a continuous torque at standstill of 24.0 Nm. This motor comes with an integrated multiturn absolute encoder and a blocking brake providing 11 Nm holding brake torque. It has a centering diameter of 130 mm and uses a standard housing with a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-030-N2M-130PR1 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers closed-loop rotary motion to industrial axes that require accurate positioning and repeatable speed control. The rotor is balanced to a standard grade to reduce vibration during operation, and the motor uses a standard housing for common machine layouts. It is well suited for automated equipment where the drive must regulate torque, speed, and position under changing load conditions. Because it is a synchronous servo motor, it can respond quickly to command changes during indexing, feed, and positioning cycles.
Its centering flange has a 130 mm diameter, allowing rigid mounting to gearboxes or machine frames. When powered by a compatible drive, the motor can sustain 24.0 Nm of continuous torque at standstill while remaining within its thermal range. The nominal speed is 3000 rpm, which suits packaging and material handling equipment that requires fast axis response. All electrical and feedback conductors exit on the right side through a sealed connector interface, and the integrated encoder sends position data as digital servo feedback so the controller can close the loop without external transducers. The motor uses frame length D to provide the required stator depth for this output range.
A blocking brake is included for vertical or intermittent-motion axes, and it supplies 11 Nm of holding torque when power is removed. Contamination ingress is limited by a shaft seal, and rotary power is transmitted through a keyway on the single shaft end. No secondary shaft extension is provided on side B, which helps keep the overall motor length shorter. The frame size is 093, giving a rotor and stator diameter that balances inertia and power density for mid-range servo duties. The brake supports load retention at rest, while the sealed shaft area helps protect internal bearing surfaces from dust and light fluid exposure.
Frequently Asked Questions about MDD093D-N-030-N2M-130PR1:
Q: What type of encoder does the MDD093D-N-030-N2M-130PR1 motor use?
A: The MDD093D-N-030-N2M-130PR1 motor is equipped with an integrated multiturn absolute encoder for precise position monitoring.
Q: What is the continuous torque at standstill for the MDD093D-N-030-N2M-130PR1?
A: This model provides a continuous torque of 24.0 Nm at standstill, supporting demanding motion tasks.
Q: Does the MDD093D-N-030-N2M-130PR1 come with a holding brake?
A: The MDD093D-N-030-N2M-130PR1 includes a holding brake with a torque of 11 Nm.
Q: What is the nominal speed rating for the MDD093D-N-030-N2M-130PR1?
A: The nominal speed for this motor is 3000 revolutions per minute.
Q: What is the connection direction and type for the MDD093D-N-030-N2M-130PR1?
A: A right-side connector is used for the electrical connection on this model.
