Product Description:

The MDD093D-N-030-N2M-130PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for digital drive controllers, it supplies precisely regulated torque and speed to axes that require coordinated motion in automated machining cells, packaging equipment, and material-handling gantries. Its design suits applications that require rapid acceleration, repeatable positioning, and compact mechanical integration on machine frames or in enclosed assemblies.

The motor centers on a flange with a diameter of 130 mm, which keeps the stator aligned concentrically with adjacent mechanics while the factory-applied balancing remains standard for smooth rotation. At standstill, it can deliver 24.0 Nm of continuous torque, giving a useful reference for sizing gear ratios or direct-drive couplings under thermal steady-state conditions. During operation, the rotor can reach a nominal speed of 3000 rpm, which is the upper continuous speed for normal process cycles. The motor uses length code D, which helps indicate the axial package size for installation planning. Position and velocity are reported through digital servo feedback, which maintains closed-loop accuracy when the axis is controlled by a compatible Rexroth drive.

A keyway shaft end transmits torque without slip, and a shaft seal helps block lubricant or coolant ingress at the output journal. The winding head includes an integrated multiturn absolute encoder, so the sensor can return position after power loss without requiring a homing move at restart. Because the unit is supplied without a blocking brake, any static holding torque must be provided by the drive or by an external brake module. Power and feedback conductors exit on the right side through a molded connector, which simplifies cable routing along machine sidewalls while preserving the housing’s standard protection.