Product Description:

The MDD093D-N-030-N2M-130PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is installed on automated tooling, packaging lines, and coordinated multi-axis systems to deliver commanded torque and speed under closed-loop control. Its synchronous design supports accurate positioning and repeatable motion in applications that require stable servo response. This motor type is commonly paired with servo amplifiers that monitor rotor position continuously so commanded moves can be corrected during acceleration, deceleration, and dwell.

The motor provides a continuous standstill torque of 24.0 Nm, giving the drive stable reserve for holding stationary loads and performing low-speed moves without overheating. Its nominal operating speed is 3000 rpm, so gearing and control loops can be matched to common high-speed servo applications. A centering diameter of 130 mm forms the pilot surface that aligns the housing on machine plates, while standard balancing helps reduce shaft vibration during operation. Motor size 093, length code D, and the standard housing establish the physical envelope and thermal surface available for this frame.

Cabling enters through a left-side connection, and quick-release connectors simplify installation where space is limited. The built-in holding brake provides 22 Nm of torque to lock the rotor when power is removed. Position data comes from an integrated multiturn absolute encoder used with digital servo feedback for commutation and closed-loop control. A factory-installed shaft seal helps block oil and coolant at the keyed shaft, and the motor is supplied without a side B shaft extension. Power and feedback use a circular connector with IP-rated shielding, and the standard shaft end supports pulleys, gears, or rigid couplings.