Product Description:

The MDD093D-N-030-N2M-130PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for pairing with digital drive controllers so that industrial machinery can receive precise, repeatable torque and speed regulation during positioning, indexing, or continuous-cycle motion profiles. Its synchronous design suits machine axes that require stable response during frequent starts, stops, and speed changes. This type of motor is commonly used where repeatable acceleration and steady operation are needed under changing loads.

At standstill, the motor delivers a continuous torque of 24.0 Nm, which allows static axis holding without overheating when the load remains fixed. Its rated operating velocity is 3000 rpm, which is the upper synchronous speed before flux weakening is applied. A centering shoulder diameter of 130 mm provides a rigid geometric reference for aligning the flange to gearboxes or driven assemblies. Position data is returned to the controller through digital servo feedback (DSF), giving the drive high-resolution information for tight velocity loops. Power and feedback conductors exit on Side A, which helps keep cable routing consistent when multiple axes are mounted on the same machine wall.

Electrical terminations use a connector, which allows straightforward cable attachment. Absolute position tracking over multiple revolutions is furnished by the integrated multiturn absolute encoder, so the axis does not require a homing routine after power is restored. The output shaft uses a keyway to reduce the chance of slip under shock loads, and the stator follows motor length code D, which gives the motor a longer magnetic stack than shorter lengths. The motor also uses standard dynamic balancing, a sealed housing to limit lubricant ingress, no holding brake, and a single-ended shaft for common coupling arrangements in packaging, handling, and transfer modules.