Product Description:

The MDD093D-N-030-N2M-130GR2 synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical energy from the drive into precise rotary motion for position and speed control in automated machinery, material handling lines, and packaging equipment. The motor is suited to closed-loop servo axes that require accurate starts, stops, and speed changes during repetitive production cycles. Its synchronous design helps the drive maintain commanded motion with stable response during indexing, feed, and transfer tasks.

The motor uses a centering diameter of 130 mm and a D-length housing that fit the 093 frame size. At standstill, the rotor can deliver a continuous torque of 24.0 Nm, which provides steady holding force for indexing axes without overheating. When braking is required, the integrated blocking brake supplies 22 Nm to hold the shaft during power-off conditions. Under rated operating conditions, the motor reaches a nominal speed of 3000 rpm, which supports fast travel on machine axes. Motion feedback is supplied through digital servo feedback (DSF) from an integrated multiturn absolute encoder, allowing the controller to track position over multiple revolutions.

Power and feedback lines exit on the right side through a sealed connector, which helps keep cable routing compact where space around the motor is limited. The rotor and fan are balanced to a standard grade to reduce vibration during repeated motion cycles. A plain shaft without a side-B extension mates with couplings or pulleys, and a shaft seal is installed to limit dust or coolant ingress at the bearing seat. The single shaft end leaves the opposite side of the motor closed, which simplifies coupling layouts and avoids unused shaft projections. This arrangement is suitable for enclosed machine assemblies that require a compact motor outline and protected cable entry.