Product Description:

The MDD093D-N-030-N2M-130GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into controlled torque and speed for assembly systems, transfer units, and material-handling axes. Integrated feedback and braking functions let the motor operate as a self-contained axis package without external position sensors or separate holding hardware. This layout makes it suitable for machines that need accurate starts, stops, and dwell positions through repeated cycles. Its housing is intended for direct machine mounting where compact installation and repeatable motion are required.

At stall, the rotor supplies 24.0 Nm of continuous torque, giving the axis solid static load support and strong low-speed performance. At rated excitation, the shaft reaches 3000 rpm, providing the speed range commonly needed for coordinated servo motion. A centering pilot of 130 mm helps align the motor accurately with the machine interface. Power and feedback connections leave through a right-facing connector, and position data are carried by digital servo feedback for closed-loop current, velocity, and position control. The rotor is balanced to a standard grade to help limit vibration, and the housing can work with cabinet convection or forced air when the duty cycle requires additional cooling.

For holding duties, the integrated brake applies 11 Nm when power is removed, helping keep vertical or suspended loads from drifting at standstill. An integrated multiturn absolute encoder retains position information through power cycles, so the axis can resume operation without a homing move in many applications. The output uses a plain shaft with a shaft seal to protect the bearing area from contamination. There is no side B shaft extension, which leaves the rear section dedicated to the brake and feedback components. Frame size 093 keeps the mounting pattern consistent within this motor class, and the D-length housing increases active motor length without changing the basic frame width.