Product Description:

The MDD093D-N-030-N2M-130GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides rotary actuation for automated tooling, handling, and packaging equipment where closed-loop regulation of velocity and position is critical to repeatable cycle performance. In digital servo systems, the motor converts commanded current into controlled torque and shaft rotation so feed axes, indexing stations, and transfer movements can respond accurately to changing load conditions. A standard housing encloses the stator laminations and windings, supporting installation in machine assemblies that require a compact motor with integrated feedback.

This model can sustain a continuous stall torque of 24.0 Nm, giving the drive enough holding force for static loads during positioning phases. Under rated electrical excitation it reaches a nominal speed of 3000 rpm, which suits mid-range motion axes that need stable speed and responsive acceleration. A centering diameter of 130 mm aligns the motor concentrically with machine frames, while standard ISO balancing helps reduce vibration during high-speed rotation. Feedback to the inverter is provided through digital servo feedback (DSF) together with an integrated multi-turn absolute encoder, allowing the control system to receive both position data and revolution count without separate external devices. Power and signal conductors enter through a sealed connector on the left side, which helps simplify cable routing in multi-axis cabinets and gantry layouts.

The motor is supplied without a blocking brake, so vertical axes need external holding force or drive torque when power is off. It uses a plain shaft with a shaft seal, allowing direct connection to clamp or shrink couplings while helping limit lubricant escape and airborne contamination. The mechanical layout follows size 093 with length code D, and the motor has a single shaft end on side A for conventional machine integration.