Product Description:

The MDD093D-N-030-N2M-130GA0 belongs to the MDD Synchronous Motors series from Bosch Rexroth Indramat. It is built for use with digital drive controllers and converts commanded current into precise rotary motion for positioning and speed-regulated axes in automated machinery. The housing uses the standard series design and standard balancing, which helps support smooth running during cyclic operation. Its face-mount construction allows direct installation on compatible machine plates and similar drive interfaces. This motor is suitable for medium-inertia handling equipment and machine tools that require accurate, repeatable motion over long operating periods.

The motor provides a continuous standstill torque of 24.0 Nm, which supports holding duty and low-speed feed tasks without overheating. The rotor reaches a nominal speed of 3000 rpm, giving a practical operating range for cyclic-duty axes. A centering pilot of 130 mm helps align the motor on the machine face during installation. The motor uses size code 093 and length code D, which indicate the housing scale and active length used in this frame. Power and feedback conductors exit on Side A through a sealed circular connector, which helps keep cable routing direct and orderly inside the machine.

Signal integrity is handled by digital servo feedback (DSF) and an integrated multiturn absolute encoder, which send position data to the controller and retain absolute position information after power cycles. This arrangement supports closed-loop motion control without requiring a separate external feedback device. The motor is supplied without a blocking brake, so any static holding force must be provided by the drive or by external mechanical hardware. A plain shaft connects directly to a coupling, and the shaft seal helps protect the internal bearings from dust and coolant. Electrical connection is made through a sealed circular connector that supports a compact cable exit.