Product Description:

The MDD093D-N-030-N2M-110PR0 is a brushless AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical commands into controlled rotary motion for positioning or speed-regulated axes in automated machinery. The motor uses frame size 093 with length code D, allowing the stator and rotor package to deliver mid-range torque while fitting machine frames commonly used in packaging, printing, and material-handling lines. This operating role supports smooth response during repeated starts, stops, and speed changes on coordinated axes.

The motor can produce a continuous standstill torque of 24.0 Nm, enabling stable static loads without overheating. Under rated excitation, it reaches a nominal speed of 3000 rpm, which supports fast production cycles. Mounting is guided by a centering diameter of 110 mm, and the rotor is factory balanced to the standard grade to reduce residual vibration during operation. Power and feedback conductors exit on the right side, and a plug-in connector simplifies cabinet wiring. The standard housing is suited to general-purpose industrial enclosures and typical enclosed machine installations.

Digital control precision is achieved through digital servo feedback (DSF), which transmits high-resolution position data from the integrated multi-turn absolute encoder to the drive and preserves position information after power loss. The mechanical output is delivered through a shaft with a keyway, while a shaft seal helps protect the internal bearings from splash and dust ingress. Because the unit is supplied without a blocking brake, any static holding force must be supplied by the drive or by external clamping devices. The shaft uses a standard single-ended arrangement, so the opposite end does not carry a second output extension.