Product Description:

The MDD093D-N-030-N2M-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat for industrial motion control within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, it translates command currents into tightly regulated shaft rotation for automated assembly stations, pick-and-place axes, and packaging lines. Frame size 093 and length code D give the motor an extended stator core for greater thermal headroom while preserving the family’s standard pilot diameter for accurate alignment in machine frames. The motor is intended for precision axis duties where compact mounting and predictable control behavior are important.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, giving machines reliable holding force during dwell periods or slow indexing moves. Under rated electrical excitation, it reaches a nominal speed of 3000 rpm, allowing direct coupling to ball screws or belt stages without intermediate gear reduction. Position and velocity loops are updated through digital servo feedback (DSF), and the integrated multiturn absolute encoder returns shaft angle information even after power loss. Power and feedback lines terminate through a connector mounted on the left side of the housing, which helps simplify routing in compact enclosures. Because the unit is supplied without a blocking brake, any static holding requirement must be met by the drive or by an external mechanical device.

A centering diameter of 110 mm supports repeatable concentric mounting, and the rotor uses a shaft seal to help limit lubricant ingress during washdown or coolant splash. The rotor and fan use standard balancing, which helps reduce vibration transfer to couplings and connected tooling at operating speed. A keyway shaft transmits torque directly to hubs or pulleys, and the single-ended layout omits a side-B shaft to keep the overall package compact. The motor also uses standard housing dimensions, matching the mounting envelope used across the series. Its cast-iron frame provides a rigid structure for servo applications that require accurate motion and stable mechanical support.