Product Description:

The MDD093D-N-030-N2M-110PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies commanded rotary motion to positioning tables, pick-and-place arms, and other axes that require precise feedback control in industrial automation. This type of motor is suited to applications where repeatable speed regulation and accurate positioning are needed throughout continuous operating cycles. Its closed-loop operation helps the connected drive maintain stable motion even when the load changes during normal machine movement.

At standstill, the motor can supply 24.0 Nm of continuous torque, allowing loads to be held without thermal overrun. During motion, it reaches a nominal speed of 3000 rpm, giving the system a consistent velocity reference for high-cycle operation. Mounting accuracy is supported by a 110 mm centering diameter, while standard balancing helps reduce vibration during rotation. Position data is delivered through digital servo feedback (DSF), generated by an integrated multiturn absolute encoder that retains shaft angle information over multiple revolutions even when power is removed. The motor is supplied without a blocking brake, so holding force during shutdown must come from external clamping or drive-produced torque.

Electrical terminations exit on Side B, and the power and feedback conductors use a connector interface for secure installation. The single drive-side shaft is machined with a keyway to transmit torque to pulleys or couplings, and a shaft seal helps protect the internal bearings from oil and dust. The motor uses a standard shaft end and does not include a second output on the non-drive side. Its encoder connection is integrated into the motor layout, which helps keep external wiring organized in enclosed machine assemblies.