Product Description:

The MDD093D-N-030-N2M-110PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies commanded torque and speed to rotary axes in automated assembly, handling, and packaging equipment where closed-loop positioning is required. It is suited to machines that need repeatable starts, stops, and accurate position control under changing load conditions.

This model delivers a continuous standstill torque of 24.0 Nm, allowing the axis to hold static loads without overheating. Under rated excitation, it reaches a nominal speed of 3000 rpm, so motion profiles that demand rapid indexing can be executed without mechanical gearing. Position information is returned through digital servo feedback (DSF) generated by the integrated multi-turn absolute encoder, enabling the drive controller to correct deviation during operation. A centering diameter of 110 mm is used for the pilot fit on the machine frame, while power and feedback connectors point toward Side A. The connection interface is a sealed industrial connector that supports secure cable attachment and quick removal.

The rotor uses standard balancing to minimize vibration during operation, and a blocking brake supplies 11 Nm of holding torque whenever the drive is disabled. The housing uses the standard series design for thermal conduction, and the frame has length code D within motor size 093. A single-ended shaft with a keyway transmits torque to couplings, and the front bearing region is protected by a shaft seal that keeps lubricant inside and helps limit contaminant entry. The shaft end is the standard single-ended version, so the motor can mount flush against gearboxes or pulleys without extra overhang.