Product Description:

The MDD093D-N-030-N2M-110PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts precisely modulated current from an inverter into mechanical rotation for positioning, conveying, or cyclic tooling axes in industrial automation cells. Its synchronous design supports accurate speed regulation and repeatable stopping in closed-loop motion systems where stable torque delivery is required throughout changing duty cycles.

The mechanical load limit at zero speed is 24.0 Nm of continuous standstill torque, allowing the axis to hold static forces without overheating. During motion, the motor reaches a nominal speed of 3000 rpm, which suits medium-speed production equipment and common servo applications. Installation is centered by a 110 mm pilot diameter that mates with standard machine flanges to help keep radial runout low. Power and feedback leads exit on Side A, so cable routing can be directed consistently within the machine. Command signals are returned through Digital servo feedback (DSF), which supplies high-resolution position data for closed-loop control and stable response during speed changes.

An integrated multi-turn absolute encoder inside the housing supplies continuous position counts over multiple revolutions, eliminating the need for a homing routine at start-up. The motor is supplied without a blocking brake, so applications that require holding torque at rest must use external clamping or drive-produced torque. A labyrinth and lip arrangement provides service-life protection, and the motor is delivered with a shaft seal to resist lubricant migration and fine contaminants. Connection to the driven machine is through a shaft machined with a keyway, which provides positive torque transmission and compatibility with standard couplings. The standard housing and balanced rotor support smooth running across the operating range.