Product Description:

The Bosch Rexroth Indramat MDD093D-N-030-N2M-110GR0 belongs to the MDD Synchronous Motors series and is supplied as a rotary servo unit for digital drive controllers in machinery. Within a closed-loop axis, the motor converts electrical commands into precise mechanical motion, making it suitable for positioning tables, feed drives, and packaging stations. Its form factor follows the 093 frame standard, so it fits machine frames and compatible drive systems that use the same mechanical interface.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, allowing it to hold or index substantial loads without overheating. During operation, its rotor can reach a nominal speed of 3000 rpm, which supports fast motion in feed and positioning applications. The flange provides a centering register of 110 mm, so accurate concentric alignment is maintained when the unit is bolted to a gearbox or mounting plate. Power and feedback conductors exit on the right side, which can simplify wiring when adjacent axes are arranged to the left. Real-time position data are returned through digital servo feedback (DSF), allowing the controller to maintain precise velocity and position loops.

Rotor angle is measured by an integrated multi-turn absolute encoder, so absolute position remains available after power cycling without a homing routine. The motor is supplied without a blocking brake, so applications that need holding force must use an external brake or another retention method. The shaft includes a factory-installed shaft seal that helps limit lubricant loss and contaminant ingress in oily environments. A plain shaft profile supports backlash-free couplings such as shrink disks or clamp collars. The motor uses length code D, which gives it a longer active stack and more thermal surface for continuous duty.